Free Next Day Delivery
Direct from the Brand
Aftersales Support
Support
10L 2 Peak HP Wall Mountable Wet/Dry Vacuum
VOM205P 1101
Learn how to set up and use your wet and dry vacuum cleaner with instruction manuals, user guides, and FAQs.
Setting Up
1）Check Power & Remove Head: Verify that the power cord is disconnected from the outlet and remove the power head from the collection tank.
2）Empty Tank: Remove all contents from inside the collection tank and ensure you have all parts listed in the manual.
3）Install Handle: Insert the carry handle into the slots located on the top of the power head and secure it with the provided screws.
4）Dry Vacuuming Setup: For dry vacuum cleaning, install the supplied reusable cloth filter over the filter cage and secure it with the tensioning ring.
5）Wet Vacuuming Setup: For wet vacuuming, remove the cloth filter and install the supplied foam wet filter over the filter cage.
6） Assemble Power Head: Place the power head back on the collection tank, aligning it with the top of the tank, and snap the two side latches to secure it.
7）Connect Hose: Insert the larger end of the hose into the vacuum port on the collection tank and lock it into place.
8）Install Wall Mount Bracket: For your convenience, this vacuum comes with a wall mounting bracket for storage. Make sure the bracket is level and mark the hole locations. Drill a 1/8-inch diameter pilot hole in each marked location. Align the two screw holes over a wall stud and secure the bracket with the two screws provided. You can then place the vacuum cleaner into the wall mount bracket.
Maintenance
1）After each use, empty all dirt or debris from the collection tank and rinse it thoroughly before storage.
2）To clean the reusable cloth filter, remove it from the filter cage and clean it by gently tapping or brushing dirt off.
3）To clean the foam wet filter, remove it and use a mild soap and water solution to wash, then rinse with clean water.
4）Always allow washed filters to air dry completely before reinstalling and using them again.
5）Keep the air vents and motor housing free of dirt and dust by using a soft, dry brush regularly.
6）Check the power cord, hose, and attachments for any damage or debris that might block airflow before each operation.
Specifications
Model Number
VOM205P 1101
Motor
5.5Amp, 120V~60Hz
Peak HP
2†
Tank Size (gal)
2.5*
CFM
55‡
Water Lift (in)
48‡
Air Watts
100‡
Tool Weight (lbs)
6.2
Hose Diameter (in)
1-1/4
Hose Length (ft)
4
Power Cord Length (ft)
10
Warranty
2 Year
Accessories
Spare Parts
Our aim is to keep it personal. Our friendly customer service team are there if you need a helping hand.
Support
Frequently Asked Questions
Why will the vacuum not working?
This can be caused by:
1）No power supply. Check power supply: cord, breakers, fuses.
2）Faulty power cord. Unplug and check the power cord. If damaged, have it repaired by a professional.
3）The collection tank is full. Empty collection tank.
Why is dust coming from the motor cover?
This can be caused by the reusable cloth filter being missing or damaged. Try reattaching or replacing the reusable cloth filter.
Why is there reduced efficiency and motor/speed vibration?
This can be caused by:
1） There is a blockage in the nozzle or hose, or the collection tank inlet. Check nozzle, hose, and collection tank inlets for blockage.
2） The dust filter was blocked by fine dust. Take off the filter and clean it, or install a new filter.