Free Next Day Delivery
Direct from the Brand
Aftersales Support
Support
19L 4 Peak HP - Household Wet/Dry Vacuum
VOC508S 1101
Learn how to set up and use your wet and dry vacuum cleaner with instruction manuals, user guides, and FAQs.
Setting Up
1）Verify that the power cord is disconnected from the outlet and remove the power head from the collection tank.
2）Remove all contents from inside the collection tank and ensure you have all parts listed in the manual.
3）Insert the carry handle into the slots located on the top of the power head and secure it with the provided screws.
4）Turn the collection tank upside down and insert the four caster feet into the slots until they click into place.
5）For dry vacuum cleaning, slide the cartridge filter over the filter cage and secure it by turning the filter retainer clockwise.
6）For wet vacuuming, remove the cartridge filter and install the foam wet filter over the filter cage.
7）Place the power head back on the collection tank, aligning it with the top of the tank, and snap the two side latches to secure it.
8）Insert the locking end of the hose into the suction port and attach the desired accessories or extension wands.
Maintenance
1）Empty all dirt or debris from the collection tank and rinse it thoroughly after each use.
2）Clean the cartridge filter by gently tapping or brushing off dirt; replace it with a new filter regularly for optimal performance.
3）Wash the foam wet filter using a mild soap and water solution, rinse with clean water, and allow it to air dry before use.
4）Ensure all filters are completely dry before reinstalling them to protect the motor and prevent mold.
5）Keep all air vents and the motor housing free of dirt and dust by using a soft, dry brush regularly.
6）Check the hose, attachments, and power cord to verify they are not damaged or blocked by debris.
Specifications
Model Number
VOC508S 1101
Tank Capacity
19L
Length
12.6"
Width
6"
Height
11.8"
Weight
11.68 Pounds
Motor
8Amp, 120V~60Hz
Peak HP
4
Tank Size
19L
CFM
66
Air Watts
150
Water Lift (in)
61
Accessory Diameter
1-1/4-in
Hose Length (ft)
6
Power Cord Length (ft)
10
Drain
No
Blowing Port
Yes
Warranty
2 Year
Spare Parts
Our aim is to keep it personal. Our friendly customer service team are there if you need a helping hand.
Support
Frequently Asked Questions
Why will the vacuum not working?
This can be caused by:
1）No power supply. Check the power supply: cord, breakers, fuses.
2）Faulty power cord. Unplug and check the power cord. If damaged, have it repaired by a professional.
3）The collection tank is full. Empty the collection tank.
4）Switch in the wrong position. Press the ON (I) button on the power head.
Why is dust coming from the motor cover?
This can be caused by:
1） The cartridge filter is missing or damaged. Attach or replace the cartridge filter.
2） The vacuum was used to pick up fine dust, such as drywall dust, chimney soot, or ash, without a fine dust filter equipped. Remove the standard cartridge filter and install the proper fine dust cartridge filter.
Why is there reduced efficiency and motor/speed vibration?
This can be caused by:
1） There is a blockage in the nozzle or hose, or the collection tank inlet. Unplug and check the nozzle, hose, and collection tank inlets for blockage.
2） The cartridge filter is clogged by fine dust. Remove the filter and clean it, or install a new cartridge filter.