Free Next Day Delivery
Direct from the Brand
Aftersales Support
Support
400 Series Upholstery Spot Machine
SCB301
Learn how to set up and use your carpet and spot cleaner with instruction manuals, user guides, and FAQs.
Setting Up
1） Align the hose storage holder with the designated slot and slide it down until it is secured into place.
2） Align the tool storage holder with its slot and slide it down until it is firmly in position.
3）Slide the tough stain nozzle onto the end of the suction hose until a click is heard.
4）To avoid damaging the power cord, wrap it loosely around the cord hooks, starting from the lower hook first.
5）Lift and remove the clean water tank from the unit.
6）Open the tank cover and fill with room temperature water (Max 104°F/40°C) to the desired fill line.
7）Add cleaning solution based on the job size: use 3 caps for a small cleaning area (0.8L) or 6 caps for a large cleaning area (1.6L).
8）Reinstall the clean water tank cover and slide the tank back onto the unit until the security latch clicks into place.
Maintenance
1）Turn off and unplug the unit before performing any maintenance; wipe the exterior with a clean, damp cloth.
2）Empty and rinse the dirty water tank with clean water after each use to keep the spot cleaner and functioning properly.
3）Clean the tough stain nozzle by pressing the tool release button, removing the nozzle cover, and rinsing it thoroughly with water.
4）Use the hose cleaning tool regularly by filling the clean water tank with warm water and holding the spray trigger for 30 seconds to flush out debris from the hose.
5） Remove the dirty water tank to access and clean any dirt or debris from the filter grill.
6） If the hose is blocked, use a Phillips screwdriver to remove the hose and clear clogs, ensuring the sealing ring is properly positioned when reattaching.
7） Store the cleaner in a dry, cool indoor area with the tanks cleaned and dried to prevent odors.
Specifications
Model Number
SCB301
Battery Required
No
Length
12.6"
Width
8.8"
Height
12.8"
Air Watts
70‡
Weight
8.67 Pounds
Hose Length (ft)
6
Power Cord Length (ft)
15
Warranty
1 Year
Motor
3.5Amp, 120V~60Hz
Clean Water Tank Size
1.6L
Dirty Water Tank Size
2.2L
Water Lift (in)
68‡
Spare Parts
Our aim is to keep it personal. Our friendly customer service team are there if you need a helping hand.
Support
Frequently Asked Questions
Why is the spot cleaner not working?
This can be caused by:
1）Unplugged at the power outlet. Plug in firmly to a suitable power outlet.
2）Defective power outlet. Check with a good appliance. Be sure the power cord plug is fully plugged into an electrical outlet.
3）The motor is damaged. Have the damaged part checked by qualified personnel or contact the after-sales helpline 1-866-384-8432.
Why is there poor pick-up performance?
This can be caused by:
1）The dirty water tank is not installed correctly. Check the dirty water tank for correct installation. Ensure it is installed in place.
2）The dirty water tank is full. Empty the dirty water tank.
3）The suction hose is clogged. Clean the hose.
4）The float valve is activated. Empty the dirty water tank.
Why is water escaping from the spot cleaner?
This can be caused by:
1）The dirty water tank is full. Empty the dirty water tank.
2）The dirty water tank is not installed correctly. Check the dirty water tank for correct installation. Ensure it is installed in place.
3）The clean water tank is not installed correctly. Check the clean water tank for correct installation. Ensure it is installed in place.
Why is there no solution spraying out?
This can be caused by:
1）The clean water tank is empty. Fill the clean water tank.
2）The clean water tank is not installed correctly. Check the clean water tank for correct installation. Ensure it is installed in place.
Why does the hose nozzle not spray after filling the clean water tank?
This can be caused by air being trapped in the pump and hose. Turn on the spot cleaner. If the hose does not spray, prime the pump by lowering the hose down to the floor and holding the trigger for up to 1 minute.
Why has the motor noise become high pitched?
This can be caused by:
1）The dirty water tank is full. Empty the dirty water tank.
2）The suction hose is clogged. Clean the hose.
3）The float in the dirty water tank has been activated. Empty and clean the dirty water tank.