Free Next Day Delivery
Direct from the Brand
Aftersales Support
Support
Vacmaster AM201 1101 Red Edition 550 CFM Portable Air Mover
AM201 1101
Learn how to set up and use your air mover with instruction manuals, user guides, and FAQs.
Setting Up
1）Verify that the 3-speed on/off switch is set to "0" (OFF) and the cord is unplugged.
2）Place the air mover in the desired position on a stable surface. Ensure there is at least a foot of clearance on each side of the air mover. Avoid placing the air mover where loose fabric, sheets, or other objects can get pulled onto the intake grills.
3）Direct air mover at the designated target area, using one of the three operational positions: horizontal, 45° angled, or 90° vertical.
4）Plug in the air mover to a grounded, GFCI-protected outlet. Ensure the unit is grounded correctly and DO NOT USE WITH AN EXTENSION CORD.
5）Turn on the air mover by rotating the 3-speed on/off switch clockwise to the desired power level: I (Low), II (Medium), or III (Maximum).
6）The air mover is equipped with an overload protection feature. If the air mover is overloaded, it will shut off and will need to be reset. If this occurs, first remove any power tools or other devices from the power receptacle. Then set the 3-speed on/off switch to "0" (OFF) and press the reset button. Check that there are no obstructions preventing airflow into the intake grills before turning on the air mover again.
7）When finished with use, turn the 3-speed on/off switch counter-clockwise to the "0" (OFF) position and unplug the power cord from the outlet.
Maintenance
* Keep in mind to conduct maintenance before & after each use.
1）Inspect the plug and the power cord to ensure that it has not been damaged during operation or between uses. If the plug or cord is damaged, do not use the air mover and replace the damaged part immediately.
2）Check the air intake and air discharge grills and make sure they are free of any blockages. Ensure that the unit is never operated without the intake grills, air discharge grill, and impeller.
Cord Storage
1）Before storing the air mover, ensure the on/off switch is turned to the "0" OFF position, and unplug the unit from the power outlet.
2）Wrap the power cord around the base of the handle to keep it secure and organized.
Storing the Air Mover
1）To conserve space while storing multiple units, this air mover can be stacked together with multiple additional units. Do not stack more than three units high.
2）To stack, the pegs on the intake grill on the side of the unit must be inserted into the peg receiver on the opposite side of the partner unit. Stack only on a stable, level, even surface.
CAUTION: Do not turn on the air mover while it is stacked. The stacking pegs are for storage purposes only. Do not transport stacked units unless they are braced on all sides.
WARNING: Do not store outdoors. Store in a dry environment, away from hazardous materials, such as toxic, carcinogenic, flammable, or explosive substances.
Specifications
Model Number
AM201 1101
Power Supply
Corded 120V
Power Cord Length
12 ft
Adjustable Positions
0°, 45° & 90°
Max Air Flow Speed
51 km/h (32 mph)
Remote Control
No
Airflow
550 CFM
Speeds
3 Speeds
Motor Power
156W
Motor Voltage
120V
Recommended Uses For Product
Drying
Noise Level
61 Decibels
Dimensions
26.8D x 33.2W x 32.2H CM
Amperage
1.3 Amps
Stackable
Yes
Weight
7.8lbs
Special Features
Portable
Warranty
2 Year
Spare Parts
Our aim is to keep it personal. Our friendly customer service team are there if you need a helping hand.
Support
Frequently Asked Questions
Why is the air mover not working?
This can be caused by:
1）No power supply. Check the power supply, cord, breakers, and fuses.
2）Faulty power cord. Unplug and check the power cord. If damaged, have it repaired by a professional.
3）Switch in the wrong position. Move the switch to the "On" position (I, II, or III).
4）The switch is faulty or burned out. Have the switch replaced by a professional.
5）Overload protection has engaged, shutting off the air mover. First, check and remove any power tools or other devices from the power receptacle. Then set the switch to the "Off" position (0) and press the reset button.
Why does the air mover make a loud scraping noise while working?
A loud scraping noise may indicate damage causing a deformed housing or misaligned blower wheel. The recommended solution is to replace the air mover.
Why does the air mover run but the blower wheel does not rotate?
This can be caused by:
1）The blower wheel and housing are jammed. The solution is to replace the air mover.
2）There is a problem with the switch or capacitor. The solution is to replace the air mover.
Why does the air mover run briefly then shut off?
This can be caused by:
1）The intake grill or air discharge grill is obstructed. Remove the obstruction.
2）The motor is damaged or worn out. The solution is to replace the air mover.
Why is the air mover running but with excessive vibration?
This can be caused by:
1）The blower wheel has dirt buildup. Have the air mover inspected by a professional or have the blower wheel cleaned by a professional.
2）The blower wheel is damaged, or the motor is bent. The solution is to replace the air mover.